6/17/2006
Lots of pictures here. It is part of my effort to encourage you modem folks to switch to broadband. The picture of me is once again to prove it is me who is doing the building.
I finished drilling the right WD-813 into place. For no particular reason I skipped a few steps ahead and drilled and riveted the right F-854 longeron gusset. I drilled it a little too close to the firewall and to the edge of the longeron. I used a 1/8" gap but this was close enough to cause interference problems with the rivets going through the side of F-854. The inside view of F-854 above shows that I buggered up the side rivets while trying to buck the top ones. I think I am going to have to redo a few of these.
I fit the mid cabin braces into place. I made the angle parts used to support them in the front and back. Both of these are fairly tight.