|
10/13/2006 |
Received Firewall Forward Kit |
0.5 |
11/19/2006 |
Installed throttle/mixture mount. |
2.0 |
|
11/21/2006 |
Received engine. Installed elec fuel pump outlet tubing and fitting |
2.0 |
11/23/2006 |
Positioned engine for hoisting |
1.0 |
|
11/24/2006 |
Mounted engine to airframe. |
3.0 |
1/21/2007 |
Hung the exhaust system |
0.5 |
|
1/24/2007 |
Torqued exhaust bolts. |
0.5 |
2/2/2007 |
Looking for missing stuff to order. |
0.5 |
|
2/3/2007 |
Temporary hookups to look for fit issues |
0.5 |
2/6/2007 |
Discovered that I have wrong fuel injector servo |
0.5 |
|
2/9/2007 |
Installed replacement servo |
0.5 |
2/15/2007 |
Installed alternator |
2.5 |
|
2/16/2007 |
Thinking |
0.5 |
2/17/2007 |
Hooked up hoses, fittings and mounted sensors. |
4.0 |
|
2/18/2007 |
Cut hole in f/w for heater. Attached push/pull cables |
1.5 |
2/19/2007 |
Installed alternator belt cut hole in ldg gear box for control cables. |
3.5 |
|
2/21/2007 |
Installed remaining CHT, EGT and oil press sensors. |
2.5 |
3/10/2007 |
Fitted left cylinder baffles |
2.0 |
|
3/11/2007 |
Fabricated angle, spacer and fitted around #4 cylinder |
3.0 |
3/12/2007 |
Fitted right rear and right cylinder baffles |
3.0 |
|
3/13/2007 |
Fitted left front floor baffle. |
2.5 |
3/14/2007 |
Started on left front baffle |
2.0 |
|
3/15/2007 |
Fitted left front baffle |
3.0 |
3/17/2007 |
Fitted left front baffle. Fabricated parts. Riveted front baffles. |
8.5 |
|
3/18/2007 |
Installed oil cooler |
3.5 |
3/20/2007 |
Attached seal to left rear baffle |
1.0 |
|
3/21/2007 |
Attached seal to right rear baffle |
1.0 |
3/23/2007 |
Attached rear to right side |
1.0 |
|
3/24/2007 |
Attached seal to right front |
1.5 |
3/25/2007 |
Finished attaching baffle seal. Attached hoses to oil cooler. Hooked up
alternator. |
4.0 |
|
3/26/2007 |
Started installing exhasut supports |
1.5 |
3/27/2007 |
Finished installing exhaust supports. Assembled heat muf |
2.5 |
|
3/28/2007 |
Finished w/ heat muf |
1.0 |
3/29/2007 |
Expanded hole for throttle/mixture cables in landing gear box. |
2.5 |
|
3/31/2007 |
Installed throttle eyeball seat. |
2.0 |
4/1/2007 |
Finished "eyeball" seals for throttle/micture cables. Installed alt air
cable, breather tube, fuel pump overflow, map sensor and prop bolts. |
8.0 |
|
4/2/2007 |
Installed ignition wire seals for right rear baffle. |
2.0 |
4/3/2007 |
Re-enforced wire attach points on left baffles. Installed ignition wire
seals. |
3.5 |
|
4/6/2007 |
Cut front of air box. Drilled top plates together |
2.5 |
4/7/2007 |
Cut air box to fit to cowl. Drilled air box. Fiberglassed over cut. |
3.5 |
|
4/8/2007 |
Trimmed away at spinner. Drilled to spinner plates. |
3.0 |
4/9/2007 |
Finished air filter assembly - except fiberglass arounbd lower cowl. |
3.0 |
|
4/10/2007 |
Fiberglassed between the cowl snout and air filter box. |
2.5 |
|
|
|
|
|
|
|
|
|
|
