I cleaned up and ScotchBrite the skins and other parts that are supposed to be ProSealed. Then I mixed up a small amount and blobbed it on the AN fitting for the fuel pickup line.
|
|
|
Tonight I dimpled all of the holes in the tank. I didn't follow Van's
advice and used the squeezer to do the dimples it could reach. The
dimples were OK but I could tell that the metal near the dimples was
slightly distorted. I am sure it has something to do with the skin being
as thick as it is. I went back and pounded them with my c-frame and the
distortion went away. I cleaned up and ScotchBrite the skins and other parts that are supposed to be ProSealed. Then I mixed up a small amount and blobbed it on the AN fitting for the fuel pickup line. |
| email: Luis Luciani | Next | Prev | Index | Home |