 |
|
I mixed up a blob of ProSeal in a mixing cup and applied a little
on each stiffener hole on the outside. Then I inserted rivets and taped
them in. Then I buttered the stiffeners and squished them into place.
Then I back riveted them into place. I buttered the fuel cap filler neck, put dabs of ProSeal in the rivet holes and riveted the filler neck into place. I did the same for the drain. The last picture above is of my garage with everything shuffled around to make room for the fuselage kit. |
| email: Luis Luciani | Next | Prev | Index | Home |