This worked great. I was able to debur holes a lot faster than using the hand crank. I was able to do about 1 hole per second. I deburred both sides of all four skins. I also deburred the edges.
I dimpled the top inside skin.
|
|
|
I started to debur the holes for the skins but very quickly started to
think that there has to be a better way. I planned to buy one of those
drills that looks like a tube but I found the little beauty shown above
at Home Depot. It uses a lithium ion battery so it is really light. I
wrapped tape around the deburring bit to keep it tight in the hole (it
is supposed to use screwdriver bits). This worked great. I was able to debur holes a lot faster than using the hand crank. I was able to do about 1 hole per second. I deburred both sides of all four skins. I also deburred the edges. I dimpled the top inside skin. |
| email: Luis Luciani | Next | Prev | Index | Home |